Products

Machine Tap

  • DIN371 376 SPIRAL FLUTE TAP

    DIN371 376 SPIRAL FLUTE TAP

    1. SPIRAL FLUTE works well in threading ACCURACY, CHIP REMOVAL and DURABILITY .
    2. Improve the efficiency of processing thread, a necessary tool for hand tapping operation.
    3. Ideal for rethreading fasteners and fastener holes for auto and machinery repair.

  • ISO529 SPIRAL POINT MACHINE GUN TAP

    ISO529 SPIRAL POINT MACHINE GUN TAP

    Sprial pointed tap, also known as tip taps, are suitable for through holes and deep threads. They have high strength, long service life, fast cutting speed, stable size and tooth pattern analysis,It is a variant of straight flute tap Suitable for through hole machining.

  • Machine tap sprial pointed tap

    Machine tap sprial pointed tap

    1. Cutting material in a continuous curl

    2. No chip blockage, thread hole

    3. High flexural damage strength

    4. Sharp chip performance, High speed machining

    Sprial pointed tap, also known as tip taps, are suitable for through holes and deep threads. They have high strength, long service life, fast cutting speed, stable size and tooth pattern analysis,It is a variant of straight flute tap Suitable for through hole machining.

  • PIPE THREAD BSP TAPER TAP

    PIPE THREAD BSP TAPER TAP

    1. High-quality material, wear-resistant and rust-proof, suitable for bench drills, tapping machines, electric drills and other machines, and can also be used by hand
    2. Thread standard, cutting resistance is smaller than ordinary taps, it is the choice of through-hole processing, standard pitch, no bad teeth, no burrs
    3. Four-square universal chuck, using manual tapping twister or tapping machine, convenient and quick
    4. Easy to use. Slotting in the front section, chip removal on the upper phase, through holes and blind holes are available, and can be used for copper or steel.

  • ISO529 SPIRAL FLUTE SCREW MACHINE TAP

    ISO529 SPIRAL FLUTE SCREW MACHINE TAP

    1.Professional HSS Screw Tap Manufacturer
    2.High Quality Material: HSS/HSS-E TIN Coated
    3.Fully-ground, dimensionally stable
    4.Customized Service is available for your need

  • ISO529 Straight Flute Screw Tap

    ISO529 Straight Flute Screw Tap

    1.Suitable for tapping most material in through holes
    2. ISO529 Standard
    3. Sizes from M1 to M100 coarse thread pitch straight flutes machine screw tap with GB mm size